How to Safely Change a Flat Tyre

Why It’s Important to Know How to Change a Flat Tyre

A flat tyre can happen anytime, anywhere. If you don’t know how to handle it properly, you risk endangering yourself and others on the road. Knowing the correct method saves time and ensures your safety.

Tools You’ll Need:

• Spare tyre

• Car jack

• Lug wrench

• Warning triangle

• Flashlight (at night)

• Gloves (optional)

Safe Steps to Change a Flat Tyre:

1. Pull Over to a Safe Spot

Slow down and stop your car on a flat surface, away from traffic. Turn on your hazard lights and place the warning triangle 3-5 meters behind your vehicle.

2. Apply the Handbrake and Turn Off the Engine

This prevents the car from moving while you work.

3. Loosen the Lug Nuts

Use the lug wrench to loosen the nuts, but don’t remove them completely yet. Do this before lifting the car.

4. Set Up the Jack and Lift the Car

Position the jack under the correct lifting point (usually near the tyre). Raise the car until the flat tyre is off the ground.

5. Remove the Flat Tyre

Once the car is lifted, remove all the nuts and gently pull the tyre off.

6. Install the Spare Tyre

Align the spare tyre and put it in place. Hand-tighten the lug nuts.

7. Lower the Car and Tighten the Nuts

Carefully lower the vehicle and tighten the nuts in a criss-cross pattern to ensure even pressure.

8. Double-Check Everything

Ensure all nuts are securely tightened and the spare tyre is properly installed. Store your tools neatly.

Extra Tips:

• Regularly check your spare tyre’s air pressure.
  

• Spare tyres are temporary; replace them as soon as possible.
  

• Visit a mechanic for inspection afterward.
  
  

Conclusion:
Knowing how to change a flat tyre empowers you to handle emergencies confidently. Stay prepared, stay safe, and always carry emergency tools in your car.